Fellowes Sb 99Ci Shredder Troubleshooting. Control panel and leds 1. This action will stop shredder immediately.
FELLOWES, INC. 3229901 INTELLISHRED SB99CI SHREDDER from www.hippo-deals.com
Here’s how to do it: If not oiled, a machine may experience diminished sheet capacity, intrusive noise when shredding and could ultimately stop running. • this shredder has a disconnect power switch (g) that must be in the on (i) position to operate shredder.
If Not Oiled, A Machine May Experience Diminished Sheet Capacity, Intrusive Noise When Shredding And Could Ultimately Stop Running.
As the shredder reverses the paper, gently pull out the uncut portion. This will help to clear the paper from the blades. Shredder must be plugged into a properly grounded wall outlet of.
Use Fellowes Waste Bag 36053.
Regularly oiling your fellowes shredder maximizes performance and extends shredder life. Then look for the sensors in the paper entry area. • this shredder has a disconnect power switch (g) that must be in the on (i) position to operate shredder.
The Shredder Will Not Run If The Bin Is Open.
To shred cds rotate cd flap into place feed paper straight into paper entry and release plug in and put disconnect power switch in on (i) position hold cd/card at edge, feed into cd/card flap entry and release when finished shredding set to off ( ) or. 1 turn off and unplug shredder lift cd flap. † rotate cd flap entry for shredding cds/cards.
Fellowes Shredders Can Grind Off.
To avoid these problems, we recommend you oil your shredder each time you empty your waste bin. Get free expert troubleshooting help, support & repair solutions for all fellowes products. Ideally after every 15 minutes of use.
If Reversing The Paper Does Not Unclog The Jam, Try Toggling Between “Reverse” And “Auto Forward” For Two Seconds Each.
When illuminated, the shredder waste bin is full and needs to be emptied. † this shredder has a disconnect power switch (g) that must be in the on (i) position to operate shredder. Troubleshooting a fellowes personal shredder usually involves clearing a paper jam, cleaning a dusty sensor, emptying the wastebasket or resetting the shredder.
